Multi Additive Injection Skid – Model TPI-4T-4A-1 – Hammonds

Description

MANUFACTURER: Hammonds Companies

Multi Additive Injection Skid – Model TPI-4T-4A-1 – Hammonds

The TPI-4T-4A-1 utilizes Hammonds proven additive injection systems to produce military specification JP-8 jet fuel by injecting FSII, CI and SDA additives. Each additive is delivered continuously and is blended evenly at ratios from 4-2500 ppm.

• Accurate additive dosage
• Thorough, complete blending
• Easily transportable
• Sturdy, solid construction
• Available in a cart configuration

Specifications:

• Number of additives: 3 standard, 4 optional
• Injection Ratios: Three additives: (1) 0-1,500 PPM (2) 0-65 PPM Four additives: (1) 0-1,500 PPM (1) 0-275 PPM (2) 0-65 PPM
• Minimum injection ratio: 10 PPM standard
• Normal operating range: 100-1,000 GPM (378-3785 liters per minute)
• Minimum product flow rates: 50 GPM (189.21) (minimums vary with line pressure)
• Product temperature: 40°F to +250°F (-40°C – 121.1°C)
• Maximum product line pressure: 125 PSI (8.8 kg/cm) (PSI max varies with injection ratios, higher pressure pumps are available as options)
• Maximum hydrostatic pressure: 350 PSI (24.6 kg/cm)
• Product viscosities: to 10,000 SSU
• Products handled: oils, fuels, chemicals
• Duty cycle: continuous
• Fluid connections – product: 6” (15.24 cm) cam lock, additives: ¼” (.6 cm) NPT or ¾” (1.9 cm) NPT

Construction Materials:

• Fluid Motor: All hard anodized aluminum with stainless steel shaft
• Injectors: All wetted parts 300 series stainless steel with Teflon® trim
• Mechanical Seal: Carbon on ceramic
• Model 800 driver.